Shower curtains are very common in modern homes. The benefits of shower curtains are convenience. They don't occupy the place. The bathroom is a place to take a bath. Every time the shower curtain is showered, it will be wet. Without knowing it, the bacteria will take advantage of it. How to prevent mold and clean in the case of constant humidity?
Cotton shower curtain
The cotton shower curtain is washed like a garment, poured into a laundry detergent, or directly machine washed. Wrinkle after drying can be ironed and used.
Canvas shower curtain
1. Canvas or cotton curtains are washed like hot cotton soap with other cotton fabrics, washed and then flattened. Most shower curtains only need to be dried. It is difficult to remove the mildew, wash it with light bleach, and then dry it.
2. If you are too lazy to brush the shower curtain, you can add the shower curtain to the washing machine, add eight or four cups of vinegar, and then leave it to the washing machine for a night. This method not only can sterilize and neutralize all the dirt, but also saves the trouble of brushing the shower curtain.
Plastic shower curtain
Use vinegar to wipe off the soap bubbles on the christmas shower curtain. Mold and grease. Let the shower curtain look like new. The bottom of the shower curtain is the most difficult to scrub. You can use a brush to rub the salt water hard, because the fine particles of salt can produce a frost-like effect. Then wipe it with vinegar to remove the stubborn stains.
Blind curtain
If you are home with blinds. Bleach can be used for cleaning and disinfection. Rinse the stain with warm water.
How to prevent mildew on the shower curtain
1. The bathroom has more water vapor, and the indoor closed shower curtain is easy to accumulate mold due to moisture. It is recommended to open the exhaust fan after bathing in the bathroom. Ensure the ventilation of the bathroom.
2. Dehumidifier or desiccant can be used in the bathroom. Avoid and reduce the mildew of the shower curtain.
3. After the shower curtain is cleared, it is exposed to the sun to eliminate bacteria and moldy mold on the shower curtain.
4. Alcohol disinfection In addition to dark spots, see the black spots on the shower curtain, and to remove the dark spots, you can first dilute the alcohol with water, evenly spray the mold on the shower curtain, because the alcohol can be disinfected, Can remove mold. Then rinse with a shower, all kinds of mold can be washed away!
2019年9月17日星期二
2019年9月11日星期三
Master the shower curtain to buy a coup
First, choose the shower curtain material
Small-sized bathroom favorite
The previous shower curtain was made of ordinary plastic, and the price was cheap, but the winter texture was hard and not strong. It was easy to tear when pulled, and even sucked on the body during the shower. Summer is good, and winter will make you very unhappy. PVC has good transparency, strong and durable, good drape, feels in general, will change with the change of weather, and it will have a slight taste; PEVA is a polymer of PE and EVA, also an environmentally friendly material, odorless and smooth, good hand feeling The more the EVA content determines the feel and drape, the higher the EVA content, the softer the feel, the better the drape and the heavier.
Second, choose the thickness of the shower curtain
Small-sized bathroom favorite
The shower curtain is not as thick as possible. Too thick fabric tends to affect the breathability and water resistance of the shower curtain. It is not easy to dry when exposed to water. It is easy to cause mildew when used for a long time, and the shower curtain is relatively thin if the fabric is drape. Good, it is also a good product, very comfortable to use. The thickness of the shower curtain is generally 0.1-0.15mm. The simplest comparison method is the shower curtain of the same size and the same weight, so the thickness can be determined.
Third, choose the size of the shower curtain
Small-sized bathroom favorite
The shower curtain size is indicated by the width * height. Please note: the width of the shower curtain is wider than the width of the bathroom, which means that the actual width of the shower curtain part needs to be larger. For example, if your bathroom or bathtub is 160cm wide, you need to purchase a 180-wide shower curtain. The curtains need to have room for extension. If you buy 160, it will not be tight. The height of the shower curtain is 180 cm to 200 cm, which is enough; the height of the shower curtain hem should be 1-2 cm. It's best not to drag the hem, it's easy to get dirty, and sometimes it's easy to tear the shower curtain if you accidentally step on it.
Fourth, pay attention to the smell
Small-sized bathroom favorite
The smell of the shower curtain is related to the printing process. Shower curtain extension printing and hand printing, the machine printing will basically not smell, but can only print some repeated colors; handprints are artificial printing, generally used in the whole effect or non-repeatable color, the process is very complicated, the cost is relatively High, at the same time printed also has a relatively heavy ink smell. The new shower curtain is directly packaged, and the package will have an ink smell. It will be hanged and ventilated, and the ink smell will naturally evaporate.
Small-sized bathroom favorite
The previous shower curtain was made of ordinary plastic, and the price was cheap, but the winter texture was hard and not strong. It was easy to tear when pulled, and even sucked on the body during the shower. Summer is good, and winter will make you very unhappy. PVC has good transparency, strong and durable, good drape, feels in general, will change with the change of weather, and it will have a slight taste; PEVA is a polymer of PE and EVA, also an environmentally friendly material, odorless and smooth, good hand feeling The more the EVA content determines the feel and drape, the higher the EVA content, the softer the feel, the better the drape and the heavier.
Second, choose the thickness of the shower curtain
Small-sized bathroom favorite
The shower curtain is not as thick as possible. Too thick fabric tends to affect the breathability and water resistance of the shower curtain. It is not easy to dry when exposed to water. It is easy to cause mildew when used for a long time, and the shower curtain is relatively thin if the fabric is drape. Good, it is also a good product, very comfortable to use. The thickness of the shower curtain is generally 0.1-0.15mm. The simplest comparison method is the shower curtain of the same size and the same weight, so the thickness can be determined.
Third, choose the size of the shower curtain
Small-sized bathroom favorite
The shower curtain size is indicated by the width * height. Please note: the width of the shower curtain is wider than the width of the bathroom, which means that the actual width of the shower curtain part needs to be larger. For example, if your bathroom or bathtub is 160cm wide, you need to purchase a 180-wide shower curtain. The curtains need to have room for extension. If you buy 160, it will not be tight. The height of the shower curtain is 180 cm to 200 cm, which is enough; the height of the shower curtain hem should be 1-2 cm. It's best not to drag the hem, it's easy to get dirty, and sometimes it's easy to tear the shower curtain if you accidentally step on it.
Fourth, pay attention to the smell
Small-sized bathroom favorite
The smell of the shower curtain is related to the printing process. Shower curtain extension printing and hand printing, the machine printing will basically not smell, but can only print some repeated colors; handprints are artificial printing, generally used in the whole effect or non-repeatable color, the process is very complicated, the cost is relatively High, at the same time printed also has a relatively heavy ink smell. The new shower curtain is directly packaged, and the package will have an ink smell. It will be hanged and ventilated, and the ink smell will naturally evaporate.
2019年8月11日星期日
Bathroom renovation process
Bathroom renovation process:
1. Design the position and size of the wash basin, toilet, water heater, bathtub or shower, then design the water circuit to draw the design plan; lay the water, electricity and heating pipes according to the drawings, then clean the ground, and then use the cement mortar. Level the ground;
2, start to do the ground waterproof layer, the coating should be uniform, thickness ≥ 1.5mm. Pay attention to the dead angle during construction, between the wall and the ground, between the water pipe and the ground. The wall is made of waterproof reference ground, the surrounding side wall is waterproof ≥20cm, there is a bathtub, and the waterproof layer should be able to spray the shower. Of course, the waterproof of the four walls can also be done at the top of the wall, and the roof of the bathroom can be made waterproof better;
3. After the waterproof construction is completed, the sewer of the bathroom should be blocked, and a “low wall” should be built at the entrance of the bathroom for water injection test. The water injection height is about 10cm. After 24 hours, if there is no leakage around the wall and floor of the bathroom, the waterproof quality of the bathroom is very good. On the contrary, find out the missing points and carry out maintenance;
4. After the closed water test is completed, dry for 5-7 days, and then make a layer of cement mortar on the waterproof coating. After the cement mortar protective layer is dry, the floor tiles can be attached. The ground should have sufficient inclination to the ground drain to facilitate drainage. The tiles on the ground should be non-slip and waterproof. The wall tiles can not absorb water, otherwise there will be color difference. The color of the tile grout should be better than the right, not too shallow or too deep. After the wall and floor tiles are attached, the normal decoration on the ground can be carried out;
5. The size and height of the washbasin countertop should be moderate (H75-85cm depending on the height), and the under counter basin is easy to clean. The waterway requirements of the basin: 50cm from the ground and 50-15cm between the hot and cold water, so that the hot and cold water pipes are in the basin. If the water heater and the wash basin are far apart to provide hot water, then another way to do it, such as installing a wash basin under the water heater for winter use;
6, the water heater is well installed on the load-bearing wall, strong. There is enough space between the two ends of the water heater and the wall for easy maintenance. If there is a bathtub, the ratio of the volume of the water heater to the volume of the bathtub should be greater than or equal to 2:3; if you want to buy the toilet, you should consider whether to choose the water before or after the water. Consider the distance between the water hole and the wall of the toilet. Go in. The toilet flushing effect is better, it is necessary to save water, and the noise is small;
7. Leave the socket on the top of the wash basin (hair dryer, razor, etc.), leave the socket below, leave the socket for the toilet (cleaning device, etc.), and leave the socket if the washing machine is placed in the bathroom. The quality of the socket should be good. To avoid the direction of the shower spray, it is necessary to bring a waterproof cover; if the cabinet is to be stainless steel, it is waterproof and easy to clean;
8, the bathroom light should be bright should not be dark, to use incandescent or natural light, lights, mirrors, doors to prevent fog; the bathroom lighting switch should be installed on the outside of the door, mirror front light, ventilation fan, Yuba, etc. should be in the switch Inside the bathroom. The selection of the wires should be based on the total power of the appliances in the bathroom.
If your bathroom is renovated, you need a christmas shower curtain, you can choose from this website.
1. Design the position and size of the wash basin, toilet, water heater, bathtub or shower, then design the water circuit to draw the design plan; lay the water, electricity and heating pipes according to the drawings, then clean the ground, and then use the cement mortar. Level the ground;
2, start to do the ground waterproof layer, the coating should be uniform, thickness ≥ 1.5mm. Pay attention to the dead angle during construction, between the wall and the ground, between the water pipe and the ground. The wall is made of waterproof reference ground, the surrounding side wall is waterproof ≥20cm, there is a bathtub, and the waterproof layer should be able to spray the shower. Of course, the waterproof of the four walls can also be done at the top of the wall, and the roof of the bathroom can be made waterproof better;
3. After the waterproof construction is completed, the sewer of the bathroom should be blocked, and a “low wall” should be built at the entrance of the bathroom for water injection test. The water injection height is about 10cm. After 24 hours, if there is no leakage around the wall and floor of the bathroom, the waterproof quality of the bathroom is very good. On the contrary, find out the missing points and carry out maintenance;
4. After the closed water test is completed, dry for 5-7 days, and then make a layer of cement mortar on the waterproof coating. After the cement mortar protective layer is dry, the floor tiles can be attached. The ground should have sufficient inclination to the ground drain to facilitate drainage. The tiles on the ground should be non-slip and waterproof. The wall tiles can not absorb water, otherwise there will be color difference. The color of the tile grout should be better than the right, not too shallow or too deep. After the wall and floor tiles are attached, the normal decoration on the ground can be carried out;
5. The size and height of the washbasin countertop should be moderate (H75-85cm depending on the height), and the under counter basin is easy to clean. The waterway requirements of the basin: 50cm from the ground and 50-15cm between the hot and cold water, so that the hot and cold water pipes are in the basin. If the water heater and the wash basin are far apart to provide hot water, then another way to do it, such as installing a wash basin under the water heater for winter use;
6, the water heater is well installed on the load-bearing wall, strong. There is enough space between the two ends of the water heater and the wall for easy maintenance. If there is a bathtub, the ratio of the volume of the water heater to the volume of the bathtub should be greater than or equal to 2:3; if you want to buy the toilet, you should consider whether to choose the water before or after the water. Consider the distance between the water hole and the wall of the toilet. Go in. The toilet flushing effect is better, it is necessary to save water, and the noise is small;
7. Leave the socket on the top of the wash basin (hair dryer, razor, etc.), leave the socket below, leave the socket for the toilet (cleaning device, etc.), and leave the socket if the washing machine is placed in the bathroom. The quality of the socket should be good. To avoid the direction of the shower spray, it is necessary to bring a waterproof cover; if the cabinet is to be stainless steel, it is waterproof and easy to clean;
8, the bathroom light should be bright should not be dark, to use incandescent or natural light, lights, mirrors, doors to prevent fog; the bathroom lighting switch should be installed on the outside of the door, mirror front light, ventilation fan, Yuba, etc. should be in the switch Inside the bathroom. The selection of the wires should be based on the total power of the appliances in the bathroom.
If your bathroom is renovated, you need a christmas shower curtain, you can choose from this website.
Santa Claus Rides On A Sleigh Pulled By Elk Bathroom Shower Curtains
2019年5月6日星期一
How to wash the bath curtain when it is mildewed
Bath curtain can be made of several materials. When the curtain is mildewed, the cleaning methods are different.
1. Hand washing with bleach
The method of hand washing bath curtain can be applied to any material of bath curtain, and the effect is the most remarkable, it is an effective method of removing mildew. First of all, the bathroom curtain mildew focus on bundled, similar to chicken rolls, and then placed in a larger pot, plus water immersion, and then use professional disinfectant + bleach, remember to wear gloves, because the disinfectant is very harmful, you can add the appropriate amount according to the instructions, and then soak, water level to exceed the bathroom curtain. Soak for about 10 minutes. If the water turns yellow and black and the mildew spots disappear, you can wash them with clean water. After washing, put the curtain in a dry place to dry.
2. Alcohol Cleaning
Alcohol disinfection has a strong disinfection effect, can effectively remove black spots, see the bath curtain mold has black spots, to wipe away the black spots, you can first dilute alcohol with water, evenly spray on the bath curtain fungus spots, because alcohol in addition to disinfection, but also mildew. Then rinse with flower spray, all kinds of fungi can be washed out!
3. Washing Machine
Some people may be too lazy to brush the shower curtain. If they want to get rid of mildew easily, they can soak the curtain in the washing machine with water, add 84 cups of vinegar, and then leave it to the washing machine for cleaning overnight. This method can not only sterilize and remove mildew, but also neutralize all dirt, and save the trouble of brushing the bath curtain by hand.
1. Hand washing with bleach
The method of hand washing bath curtain can be applied to any material of bath curtain, and the effect is the most remarkable, it is an effective method of removing mildew. First of all, the bathroom curtain mildew focus on bundled, similar to chicken rolls, and then placed in a larger pot, plus water immersion, and then use professional disinfectant + bleach, remember to wear gloves, because the disinfectant is very harmful, you can add the appropriate amount according to the instructions, and then soak, water level to exceed the bathroom curtain. Soak for about 10 minutes. If the water turns yellow and black and the mildew spots disappear, you can wash them with clean water. After washing, put the curtain in a dry place to dry.
2. Alcohol Cleaning
Alcohol disinfection has a strong disinfection effect, can effectively remove black spots, see the bath curtain mold has black spots, to wipe away the black spots, you can first dilute alcohol with water, evenly spray on the bath curtain fungus spots, because alcohol in addition to disinfection, but also mildew. Then rinse with flower spray, all kinds of fungi can be washed out!
3. Washing Machine
Some people may be too lazy to brush the shower curtain. If they want to get rid of mildew easily, they can soak the curtain in the washing machine with water, add 84 cups of vinegar, and then leave it to the washing machine for cleaning overnight. This method can not only sterilize and remove mildew, but also neutralize all dirt, and save the trouble of brushing the bath curtain by hand.
订阅：
博文 (Atom)